Hot air balloons are an ingenious application of basic scientific principles. Here we will show exactly how the
balloon works, what makes it rise and fall and how a pilot is able to maneuver it when it is in the air.
The basis of how the balloon works is that warmer air rises in cooler air. This is because hot air is lighter than cool air as it has
less mass per unit of volume. Mass can be defined by the measure of how much matter something contains. The actual balloon (called an
envelope) has to be so large as it takes such a large amount of heated air to lift it off the ground. For example, to lift 1000 pounds
worth of weight you would need almost 65,000 cubic feet of heated air! To help keep the balloon in the air and rising, hot air needs
to be propelled upwards into the envelope using the burner (see separate section on burners for more information.)
A hot air balloon is made up of 3 main parts:
- The Envelope
The actual fabric balloon which holds the air
- The Burner
The unit which propels the heat up inside the envelope
- The Basket
Where the passengers and pilot stand
The burner uses propane gas to heat up the air in the envelope to move the balloon off the ground and into the air. The pilot must keep
firing the burner at regular intervals throughout the flight to ensure that the balloon continues to be stable. Naturally, the hot air
will not escape from the hole at the very bottom of the envelope as firstly, hot air rises and secondly, the buoyancy keeps it moving up.
The controls for piloting a balloon are actually extremely simple....
1 - To move the balloon upwards
- the pilot opens up the propane valve which lets the propane flow to the burner which in turn fires
the flame up into the envelope. Works in much the same way as a gas grill, the more you open the valve, the bigger the flame to heat the air,
the faster the balloon rises.
2 - To move the balloon downwards
- the 'Parachute Valve' at the very top of the balloon is what is used to bring the balloon down
towards the ground. It is essentially a circle of fabric cut out of the top of the envelope which is controlled by a long chord which runs
down through the middle of the envelope to the basket. If the pilot wants to bring the balloon down he simply pulls on the chord which will
open the valve, letting hot air escape, decreasing the inner air temperature. This cooling of air causes the balloon to slow its ascent.
So essentially this takes care of the up and down movement, so how does the balloon move from place to place? Again the answer is very
simple, the pilot can maneuver horizontally by changing the vertical position of the balloon because the wind blows in different directions
at different altitudes. If the pilot wants to move in a particular direction they simply ascend and descend to the appropriate level and
ride with the wind.